Phee's R33 Skyline

[phee]

Here is the eye candy:

http://k43.pbase.com/g6/79/671079/2/68770632.5rtgcyEL.jpg

http://k41.pbase.com/g6/79/671079/2/68770626.Yrde9Xrp.jpg

Purchased it with:

G-Max Wheels rear: 18x9.5 with 265’s front: 18x8.5
Tein hight and rebound adjustable suspension
Full 3inch custom exhaust with Magic Cat and twin Mufflers
T70 ball bearing turbo on X-Force highmount manifold
Turbosmart 48mm Pro-Gate wastegate
100mm think Front Mount Inter Cooler
Blitz blow off valve
Sard fuel pressure Regulator
Sard 550cc injectors
Walbro 500 horsepower fuel pump
Motec Enginge Management System (M600)
Exceedy 5 puck clutch
Pod air filter
Oil catch can
Thermo fan
Bonnet vents
Isotta Steering wheel
DBA 4000 series sloted disks alround with braided lines
Braided fuel-line, blow-by, breather and radiator overflow hoses
New chrome radiator overflow tank
Gates Racing radiator hoses
Viper car alarm

Since I bought it I have put in:

Arias 20thou forged pistons
GTR rods
Bearings
Adjustable cam gear
COMETIC head gasket
Full bearing and gasket kit (rebuild)
Gates timing belt
ARP head studs

http://k43.pbase.com/g6/79/671079/2/68709462.yDlo3vAz.jpg

All of that is going to change again when it hits Canberra for it's second rebuild in 12 months. My mate doing the repair will be able to let me know any mods I have missed. A stereo system will be going in it as well while it is down south, along with a few other custom made parts :D

[1JZNOSHIT]

i dont mind the twin can action, got a few nice bits on there, best of luck with the rebuild :)

[hako]

looks very nice, twins are different

am i getting this right... you take it to canberra from the nt to get work done?

[[PIG GTS]]

are you single ??? :P
nice car ;)

[phee]

When the engine first blew it was because the diaphgram in the wastegate split causing the boost to run back through. I took it to a workshop up here in Darwin and paid 5 figures to get it back on the road. The rebuild engine lasted 1,500kms because of the workmanship from a company up here. I have a mate of mine in Canberra who is going to strip and rebuild it again. I know he knows what he is doing, and my trust in him is strong so I am paying the transport down there and back to get it done right once and for all.

No, I'm not single, my girlfriend will kick your ass :)

[mischief1]

haha, owned.

good to see people putting an effort into the performance side of things these days.

[phee]

I'd rather it look close to stock and go like a bat out of hell than look fulli sik and go as slow as the grass growing in central queensland :p

[TJ]

are you calling me female these days phee?

:(

you know i know more than enough about this car, its going to be worth it in the end :)

[phee]

You'll always be my bitch sweetheart :)

[TJ]

if you say so madam. :)

[Passage GT]

wonder if it was the same workshop that ****ed with my mates perfect tune on his s13 in darwin
car runs like a pig now..
nice car though phee, good luck with it

[phee]

Who is your mate in Darwin with an S13?

[suburban]

;174291']are you single ??? :P
nice car ;)

i was gonna ask the same thing but you got owned first saving me the 'chopped' factor

fee when you get bored of flange come to perth and visit me :P

....anyway

yeh the dual cans look good on the rear, i like it. as for two rebuilds, ouch - you gonna work the first company over with a err lawyer ?

[Twe12ve]

nice cans imo

[Brockas]

No, I'm not single, my girlfriend will kick your ass :)

Need any meat in the sandwich?

ok, just joking.

Car sounds like it's going to be an animal Phee, nice work!

[suburban]

i get the feeling ppl are here for phee and not.... err the car

;)

girl interest for you = waste

man im greasing on the internet. how lame

[Sciflyer]

The twin pipes is a nice touch, car looks hot:boink: