boost vaccum lines?

[NIPPY]

hey guys just wanting to no how boost vaccum lines need to be connected. so turbo/wastegate/bov/boost controller/boost gauge.
ive got mine connected like so - turbo to boost controller then to top of gate
than from the side of the gate goes 2 bov
than boost gauges im running of inlet manifold as well as line to my computer.
does this sound correct.

[NIPPY]

any body????

[Tocchi]

the boost controller is correctly setup

unsure about the 2nd gate outlet to BOV
... im sure the others would be able to tell you

but the gauge on the inlet manifold/map sensor outlet should be fine.
my BOV also goes off the inlet manifold line as well

[NIPPY]

thanks man so i just needa find out about the bov 2 2nd nipple on gate. anyboy else?

[AD4M]

bov should be off the plenum aswell, the 2nd feed on the gate is to add extra pressure on the diaphram to control it a bit better. doesnt need to be connected up, and doesnt feed vacume out of it so it wont be working the bov at all

[NIPPY]

so just leave it dis-connected nothing to it at all.

[AD4M]

if you really wanted too you could t peice the feed between the turbo to ebc. one to the gate one to the ebc but it really isnt needed you can leave it disconected yes