Joe
08-02-2005, 12:41 PM
For sale is a Kyosho V-One RR Evolution Remote control car.
This car is a professional vehicle, which is capable of speeds in excess of 100km/h.
I built this car to Pro Outlaw specifications, because I wanted the absolute fastest car for the car park racing my friends and I competed in regularly.
Here are the mods and work I've done to it.
Sirio Evo 2 5 port .12 outlaw engine. This engine is rated to 1.6HP and 43000rpm. Kyosho Team drivers use the 3 port version of this engine in their World championship winning V-One RRRs and FW-05RRs.
The engine in this car has the needles set back to factory settings, and requires tuning for your particular fuel (as every batch of fuel is different). This engine has 3 needles and may require professional tuning (not even I'm good enough to get it perfect), as the 3rd needle is tricky, but once its tuned, the engine is unbeatable.
This engine has LOTS of compression, and has done hardly 1 bottle of fuel.
Other features of the car include.
Motorsaver Air Filter
H.A.R.D. Racing Shark outlaw pipe
Novarossi manifold
Kyosho Team "Takaaki Shimo" Worlds chassis plate
Kyosho Team graphite upper deck
New fuel tank
I've also got LOTS of 3 Racing bits on it, including:
Aluminium front upper arm mounts
Aluminium L and R side Chassis stiffener
Slotted brake disc
Aluminium roll bar (much higher than stock, to protect the head on the Sirio)
Graphite Front A Arm plate
Graphite shock tower
Graphite front bumper plate
Alloy hex hubs
Low CG aluminium Heat sink engine mounts
Aluminium rear shock tower
Aluminium Brake bar
Alloy pulleys
Reinforced belts
Aluminium rear body stay
Aluminium rear upper arms
It runs a 1/10 Lola Can-Am shell, but unfortunately it wasnt available for the photos because it was being painted. Its blue and silver with red flames...this shell is in as new condition. it also runs Speedmind foam tyres and disc wheels front and back. These are near new and hardly worn.
A spare, but battered Alfa 156 shell will be thrown in. To use this, a foam bumper and ordinary body mounts will need to be used. The bumper and body mount parts will be supplied in the spare parts package with the vehicle.
This car also comes with a box full of Kyosho V-One series spare parts. There are so many spares, you wont know what to do with them all. It even includes spares such as a spare belts, pulleys, foam bumpers, new in package spare front outlaw bumper (as shown in pictures below) 3 Racing carbon fibre upper deck (still in package), new spur gear (still in package), screws, gaskets, spare exhaust manifold (still in package), spare foam tyres, spare pulleys to change ratios, spare sway bars, spare shocks, etc etc.
Since the photos below were taken, the car has been cleaned up even further, and new zip ties were fitted to the exhaust coupling (you can see one is missing in the photo).
With the old Novarossi engine, this car reached 96km/h on a Venom speed meter. The new engine is more powerful, and the car has been fitted with different pulleys for more top speed. It is visibly faster than before. The original pulleys will be included for ratio changes.
Reason for sale: I’ve gotten into off-road racing, and I am currently building a big dollar HPI Savage SS, and Losi Mini-T. I need more funds, so this car has to go. Very reluctant sale, as this car was my pride and joy.
$700 dollars, with Q-World starter box with 2 Venom racing hump packs, and a Team Orion 1200mah race hump pack for the car.
$850, with all of the above plus I’ll throw in a brand new in box JR XS3 Synthesized radio, servos and a GWS failsafe (the orange box you see in the photos). The failsafe will hit the brakes if your radio loses signal, gets interference or the batteries in the radio go flat, so your car doesn’t lose control and run away in the event of radio loss.
http://users.tpg.com.au/balistc/rr1.jpg
http://users.tpg.com.au/balistc/rr2.jpg
http://users.tpg.com.au/balistc/rr3.jpg
http://users.tpg.com.au/balistc/rr4.jpg
http://users.tpg.com.au/balistc/rr5.jpg
http://users.tpg.com.au/balistc/rr6.jpg
http://users.tpg.com.au/balistc/rr7.jpg
This car is a professional vehicle, which is capable of speeds in excess of 100km/h.
I built this car to Pro Outlaw specifications, because I wanted the absolute fastest car for the car park racing my friends and I competed in regularly.
Here are the mods and work I've done to it.
Sirio Evo 2 5 port .12 outlaw engine. This engine is rated to 1.6HP and 43000rpm. Kyosho Team drivers use the 3 port version of this engine in their World championship winning V-One RRRs and FW-05RRs.
The engine in this car has the needles set back to factory settings, and requires tuning for your particular fuel (as every batch of fuel is different). This engine has 3 needles and may require professional tuning (not even I'm good enough to get it perfect), as the 3rd needle is tricky, but once its tuned, the engine is unbeatable.
This engine has LOTS of compression, and has done hardly 1 bottle of fuel.
Other features of the car include.
Motorsaver Air Filter
H.A.R.D. Racing Shark outlaw pipe
Novarossi manifold
Kyosho Team "Takaaki Shimo" Worlds chassis plate
Kyosho Team graphite upper deck
New fuel tank
I've also got LOTS of 3 Racing bits on it, including:
Aluminium front upper arm mounts
Aluminium L and R side Chassis stiffener
Slotted brake disc
Aluminium roll bar (much higher than stock, to protect the head on the Sirio)
Graphite Front A Arm plate
Graphite shock tower
Graphite front bumper plate
Alloy hex hubs
Low CG aluminium Heat sink engine mounts
Aluminium rear shock tower
Aluminium Brake bar
Alloy pulleys
Reinforced belts
Aluminium rear body stay
Aluminium rear upper arms
It runs a 1/10 Lola Can-Am shell, but unfortunately it wasnt available for the photos because it was being painted. Its blue and silver with red flames...this shell is in as new condition. it also runs Speedmind foam tyres and disc wheels front and back. These are near new and hardly worn.
A spare, but battered Alfa 156 shell will be thrown in. To use this, a foam bumper and ordinary body mounts will need to be used. The bumper and body mount parts will be supplied in the spare parts package with the vehicle.
This car also comes with a box full of Kyosho V-One series spare parts. There are so many spares, you wont know what to do with them all. It even includes spares such as a spare belts, pulleys, foam bumpers, new in package spare front outlaw bumper (as shown in pictures below) 3 Racing carbon fibre upper deck (still in package), new spur gear (still in package), screws, gaskets, spare exhaust manifold (still in package), spare foam tyres, spare pulleys to change ratios, spare sway bars, spare shocks, etc etc.
Since the photos below were taken, the car has been cleaned up even further, and new zip ties were fitted to the exhaust coupling (you can see one is missing in the photo).
With the old Novarossi engine, this car reached 96km/h on a Venom speed meter. The new engine is more powerful, and the car has been fitted with different pulleys for more top speed. It is visibly faster than before. The original pulleys will be included for ratio changes.
Reason for sale: I’ve gotten into off-road racing, and I am currently building a big dollar HPI Savage SS, and Losi Mini-T. I need more funds, so this car has to go. Very reluctant sale, as this car was my pride and joy.
$700 dollars, with Q-World starter box with 2 Venom racing hump packs, and a Team Orion 1200mah race hump pack for the car.
$850, with all of the above plus I’ll throw in a brand new in box JR XS3 Synthesized radio, servos and a GWS failsafe (the orange box you see in the photos). The failsafe will hit the brakes if your radio loses signal, gets interference or the batteries in the radio go flat, so your car doesn’t lose control and run away in the event of radio loss.
http://users.tpg.com.au/balistc/rr1.jpg
http://users.tpg.com.au/balistc/rr2.jpg
http://users.tpg.com.au/balistc/rr3.jpg
http://users.tpg.com.au/balistc/rr4.jpg
http://users.tpg.com.au/balistc/rr5.jpg
http://users.tpg.com.au/balistc/rr6.jpg
http://users.tpg.com.au/balistc/rr7.jpg