Driftek wheels

[PABS]

hey,

did a search but not much found.

I am after some advice on the Driftek rims for my s14a
Who has had experience with them, it appears a number of cars run these.

I am a bit new to offset etc too.
could someone advise the right size. they need to sit just outside the guard.

Anybody selling there's? :) I have cash!

thanks,

Pav

[mitchy]

the standard offsets are pretty tame, if you want aggressive i'd be going the GTR spec 17x9.5 +18's

[DISTRBD]

There shit and seen a few sets crack ..

[PABS]

the standard offsets are pretty tame, if you want aggressive i'd be going the GTR spec 17x9.5 +18's

not front and rear though?

18's too big?

[Kimbalina]

Ive got drift teks on my s13, 17x9.5 +18's all round

http://i109.photobucket.com/albums/n63/missfailure/IMGP8902.jpg
http://i50.tinypic.com/10x5w7k.jpg

if you want to get them brand new, go through Wilkinson suspension :)
otherwise just look on forums, but most of the time you'll find they are pretty shitty second hand

good luck :)

[mitchy]

i forgot they made 18" drifteks, i'd be going for them

as for 9.5" front and rear, why not? :D the only other option is 18x9 +38 on the front, which sits about an inch further in than the 9.5's.. so you'd need spacers to bring it outside the guards.

later nissans tend to fit pretty wide rims up front, is usually rear guard clearance you have issues with with same width/offset rims all round.

(ie. a mate of mine had 18x9.5 +13 work termists on his 33 gtst-t, fronts didnt rub at all, rears made love to the guards quite a bit :P)




edit...

Ive got drift teks on my s13, 17x9.5 +18's all round

http://i109.photobucket.com/albums/n63/missfailure/IMGP8902.jpg


perfect!! :D

[R3N]

18x9 +38 on front would most likely hit coilovers...

you got 5 stud, soooo many better rims out there

[lysdexia]

i have a set

they're cracked.

[Kimbalina]

i have to have 3mm spacers on my fronts for clearance cos it was hitting the coilover..

[PABS]

18x9 +38 on front would most likely hit coilovers...

you got 5 stud, soooo many better rims out there

yes..

I was also looking at Works cr kai in white. (my car is red)
but little pricey ;(

unless someone is selling second hand????

[mitchy]

XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7

[R3N]

lenso d1rs then... tough widths and offset... do it!

[PABS]

XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7 XT7

mmm nah. not my thing

the new lenso drift D1R rim any good?

http://wheelworx.com.au/stock_wheels/Lenso/Thumbs/lenzod1r
http://wheelworx.com.au/stock_wheels/Lenso/Thumbs/lenzod1rwhite

they look quite nice

[PABS]

lenso d1rs then... tough widths and offset... do it!

very keen on these!
I believe sold is the word

who deals them?

anyone got pics....

[mitchy]

http://i629.photobucket.com/albums/uu12/SR_2000/s14%20drift%20car%20build/DSCN2389.jpg

http://i629.photobucket.com/albums/uu12/SR_2000/s14%20drift%20car%20build/DSCN2390.jpg

http://i629.photobucket.com/albums/uu12/SR_2000/s14%20drift%20car%20build/DSC00886.jpg

http://i629.photobucket.com/albums/uu12/SR_2000/s14%20drift%20car%20build/DSC00891-1.jpg

[PABS]

what size are these?

[mitchy]

17x10 +15 rear (25mm bolt on brings them out to -10 for the flared guards though)

fronts i'm not sure on, 17x9 +something

[lysdexia]

they come in more extreme sizes than those even though

they're still a china wheel though :P

[mitchy]

they come in more extreme sizes than those even though

they're still a china wheel though :P

18x10 -1 :boink:


in my opinion, 18x9 +15 front and 18x10 +22 rear would be pretty decent

can buy them through here, http://www.nissansilvia.com/forums/index.php?showtopic=342617

[PABS]

hmm i think i will need to go an 18"

by the way. cheers heaps for all the info!

[magic1]

mine work well no cracks

[DISTRBD]

mine work well no cracks

AHHHH me Nisteks , they only break under extreme driving :)

[sambo_xr6t]

na they are a good rim

[Quokka]

wilkos deal them too

[dexplosion]

dear lord!
what wheels are on that yellow 14, do fucking want

[XF Falcon]

They would be the Lenso D1R's that they were talking about for the three posts immediately before those photos :)

[dexplosion]

should probably read more before i start to fap over those delicious rims

[PABS]

re-opening old post.
whats the law with wheels sticking out past wheel arches.
I heard aslong as the tread is within thats ok??

i have purchased and fitted lenso D1R's
18x9+22 front
18x10+15 rear

and the rears stick out about an inch... maybe more