PDA

View Full Version : Wanted: Z18 parts



crazy_steves_housemate
05-04-2005, 06:45 PM
i need a z18 distributer which is the twin spark type and i am also told that that an L20b has twin spark and is compatible (unsure of this)
also a z18 carby with auto choke or L18 carby with auto choke.
please call jason on 0439020407or
email commiekazi000@yahoo.com.au

Fryman
07-04-2005, 10:30 AM
the z18 comes in one car and one car only
THE ALMIGHT S11!

bump.

sLOW navara
08-04-2005, 01:22 AM
sounds like you are having fun with the z18 all ready you dont need to run the twin plug dissy cap all you have to do is block off one side with just spark plugs will do and run a standard dissy cap.
is this thing turbo'd or not

crazy_steves_housemate
08-04-2005, 08:10 PM
non turbo. was runnin well in the morn on the way to work. only thing i changed was take the std fuel pump off and run the electric pump from the z24 and put ultimate 98 in the tank instead of leaded. its carby too. which dizzy (4 plug) will fit and from which eng?
also thankyou for not sayin i told you so. its been one thing after another this week hey dude.
cheers
jason

sLOW navara
08-04-2005, 11:50 PM
you can run your old z24 dizzy cap on the z18 dizzy all it means is that it is a 4 plug not 8 plug but that dosnt matter all the best

crazy_steves_housemate
09-04-2005, 08:51 AM
nah the dizzy cap is smaller in diameter and the shaft is too short too. already tried that one.