Need a running r31, to fault find a non runner

[Shaggy]

As topic says

I did a once over on mine, to see what needed replacing for pits. And it decided to stop working.
I have replaced the dizzy cap & button, leads and plugs. Then cleaned up the earth on the block and the little guy off the head.

Car is hard to start. Will run dead smooth for a second or so, then cough once or twice and die out. Then be hard to start again.

I think it could be the coil or afm.

I will pay a 6pack of beer for the use of a car to play swap abouts.

[DanWA]

Pull the CAS plug off and smash heaps of water dispersant into it

[magic1]

fuel filter?

[Shaggy]

sorted!

it's the plug that sits on top of the dizzy.
wiggle it and car starts. wiggle again and car dies.

[magic1]

aaaahh me 31's that why the simple folk of bunbury like them. So easy to fix.

[DISTRBD]

aaaahh me 31's that why the simple folk of bunbury like them. So easy to fix.

Also like them as it is very very rare to have a piston touch a valve ..

[Turbo2.6L]

Hahaha ZING!

[DanWA]

sorted!

it's the plug that sits on top of the dizzy.
wiggle it and car starts. wiggle again and car dies.

yeah thats the CAS plug ;)

[Shaggy]

So FYI

the part number of the plug is BK401.

and it's not on any of the diagrams, so it's a hard one to find if you don't know the part number

[Mad_Aussie]

Car running well now dude?

Time4 5stud