View Full Version : Flush Bonnet pins
Lukey
16-09-2012, 06:27 PM
My bonnet catch on my hilux surf started playing up about 8 months ago, so i just pulled it out and put in some bonnent pins( pin through the bonnet with a R clip to hold the bonnet down.
My mate also has the same on his navara but he failed the pits, something about not adr approved and needing to be flush mounted?
Doe anyone have these installed and does anyone know where i can get some? prefer perth supplier but also willing to internet order.
Cheers
Lukey
Marti
16-09-2012, 06:32 PM
you can get some from go gear or revolution race gear
Fozzy
16-09-2012, 06:33 PM
AeroCatch is what you want. http://www.aerocatch.com/
Go Gear or Revolution Racegear Should have them.
Lukey
16-09-2012, 06:57 PM
winner, any idea on dollars?
urabus
16-09-2012, 09:52 PM
I cant remember exactly but much cheaper online. From memory they are circa $100 locally.
Brendon
Yakky Bear
16-09-2012, 10:08 PM
If you goto revolution racegear ask for Mike or damo. Try not to deal with Ben, guys a pingpingpingping.
Lukey
19-09-2012, 06:44 AM
purchased and installed, set me back 130 but looks the ducks nuts, will put up some pics a little later
Lukey
19-09-2012, 11:52 AM
Old povo spec ones
http://i618.photobucket.com/albums/tt264/lukeyinthetroopy/17EB2282-9AB8-4A07-B620-EA0EC4296968-10618-00000722C5C98CAB_zps1f6b6c32.jpg
Marked out ready to cut, used a jigsaw, tin snips and a die grinding attachment for the cordless to clean up any dags
http://i618.photobucket.com/albums/tt264/lukeyinthetroopy/F4300BE0-1C93-49FF-A882-B66C5A92D842-10618-00000721A50217E6_zpsdb895060.jpg
Bolted in
http://i618.photobucket.com/albums/tt264/lukeyinthetroopy/350C5E7E-F81F-4D1C-8A4E-FFDD4D2F3E5C-10618-000007219CD1175F_zps04478ccd.jpg
Was hamstrung a little by the angles
http://i618.photobucket.com/albums/tt264/lukeyinthetroopy/9FA036DE-EC49-4CDF-8D5B-21C3B85D48B5-10618-000007218A222B74_zpsb75dc273.jpg
Needed some clearancing to cope with the angles
http://i618.photobucket.com/albums/tt264/lukeyinthetroopy/32050E3B-577D-40CB-A972-8646CFC4D343-10618-000007217E0E874B_zps73353a22.jpg
Very happy with the end result especially being the flush finish, barely visible from drivers seat unless open
urabus
19-09-2012, 12:18 PM
Put some lube on the pin as the thing jams and it is a ping ping ping to get loose.
Brendon
Lukey
19-09-2012, 06:53 PM
Yeh i got some non aerosol WD-40 that i sprayed it with yesterday, and some silicone spray i use to stop my sway bar linkages squeaking that i keep in the car as well
Powered by vBulletin® Version 4.1.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.