Pav
04-11-2013, 07:24 PM
http://img853.imageshack.us/img853/6240/puhm.jpg
For sale: 1990 Mazda FC3S RX7 JDM Import http://www.gumtree.com.au/m-my-ad.html?adId=1030722607
Condition: Highly modified but still fairly clean for a 23 yr old import!
Price and price conditions: Still more of an EOI than a 'sale' so $15500, non negotiable.
Extra Info: Build thread if you wanna check it out: http://antilag.com/forums/showthread.php?32791-Once-you-go-black-you-never-go-back...-(My-FC)&highlight=
Engine, Turbo and Exhaust
- 335 RWHP @ 14psi on Ovaboost dyno
- Garrett T04Z split pulse 1.00
- Custom steampipe manifold
- Tial 44mm wastegate with screamer
- Front mount intercooler
- K&N Pod filter
- Injector Dynamics 1000cc injectors x4
- Excedy huper multi twin plate clutch and flywheel
- New clutch slave and master
- Nismo GTR fuel pump
- PWR radiator & Davies Craig electric thermo fan
- Interchangeable hi-flow cat/straight pipe
- Custom cat back by Prestige exhaust Malaga, with Rotaflow muffler.
- Xtreme rotaries short shifter
Electronics;
- Microtech LT10s & X4 ignition module with hand controller
- Bosch coilpacks
- Apexi AVCR black edition
- Defi Link & Boost guage.
- HKS turbo timer
Body:
- Series 5 kit
- Front lip
- Mazda rear boot lip
- Foresight roof wing
- Ganador electric aero mirrors
- Foresight rain shields
- New Mazda external weather strips
- Series 5 Tail light mod
Brakes and wheels
- R32 GTR master cylinder
- Master cylinder support bracket
- Sumitomo calipers
- Slotted rotors all round
- Braided lines all round
- Ferodo FCP986H
- New seal kits in front and rear calipers
- PBR BF-600 brake fluid
- R34 GTR wheels 18x9 +30, 20mm spacers up front
- 235/40/18 rear, 225/40/18 front
Suspension:
- JIC coilovers
- Strut brace front and rear,
- Supernow under strut brace
- Supernow camber/caster tops
- Supernow Tie rod ends and steering rack spacers
- Supernow Rear camber linkage
- DTSS elimninator bushes
- Genuine Mazda transmission mount and bracket
Interior:
- Series 5 seats
- 90's style Rx-7 Floormats
- Efini bins and carpet
- New seat belts
- New dash cluster surround, aircon vents, driver switch pack, indicator switch and various other trims recently replaced
- Mazdaspeed style shift knob.
- Momo wheel
- 6 Point bolt in roll cage
And other stuff i've forgotten over the 8 years or so I've owned the car.
Contact Details: PM
Location: Landsdale
Delivery & Conditions of Delivery: Pick up and drive away.
For sale: 1990 Mazda FC3S RX7 JDM Import http://www.gumtree.com.au/m-my-ad.html?adId=1030722607
Condition: Highly modified but still fairly clean for a 23 yr old import!
Price and price conditions: Still more of an EOI than a 'sale' so $15500, non negotiable.
Extra Info: Build thread if you wanna check it out: http://antilag.com/forums/showthread.php?32791-Once-you-go-black-you-never-go-back...-(My-FC)&highlight=
Engine, Turbo and Exhaust
- 335 RWHP @ 14psi on Ovaboost dyno
- Garrett T04Z split pulse 1.00
- Custom steampipe manifold
- Tial 44mm wastegate with screamer
- Front mount intercooler
- K&N Pod filter
- Injector Dynamics 1000cc injectors x4
- Excedy huper multi twin plate clutch and flywheel
- New clutch slave and master
- Nismo GTR fuel pump
- PWR radiator & Davies Craig electric thermo fan
- Interchangeable hi-flow cat/straight pipe
- Custom cat back by Prestige exhaust Malaga, with Rotaflow muffler.
- Xtreme rotaries short shifter
Electronics;
- Microtech LT10s & X4 ignition module with hand controller
- Bosch coilpacks
- Apexi AVCR black edition
- Defi Link & Boost guage.
- HKS turbo timer
Body:
- Series 5 kit
- Front lip
- Mazda rear boot lip
- Foresight roof wing
- Ganador electric aero mirrors
- Foresight rain shields
- New Mazda external weather strips
- Series 5 Tail light mod
Brakes and wheels
- R32 GTR master cylinder
- Master cylinder support bracket
- Sumitomo calipers
- Slotted rotors all round
- Braided lines all round
- Ferodo FCP986H
- New seal kits in front and rear calipers
- PBR BF-600 brake fluid
- R34 GTR wheels 18x9 +30, 20mm spacers up front
- 235/40/18 rear, 225/40/18 front
Suspension:
- JIC coilovers
- Strut brace front and rear,
- Supernow under strut brace
- Supernow camber/caster tops
- Supernow Tie rod ends and steering rack spacers
- Supernow Rear camber linkage
- DTSS elimninator bushes
- Genuine Mazda transmission mount and bracket
Interior:
- Series 5 seats
- 90's style Rx-7 Floormats
- Efini bins and carpet
- New seat belts
- New dash cluster surround, aircon vents, driver switch pack, indicator switch and various other trims recently replaced
- Mazdaspeed style shift knob.
- Momo wheel
- 6 Point bolt in roll cage
And other stuff i've forgotten over the 8 years or so I've owned the car.
Contact Details: PM
Location: Landsdale
Delivery & Conditions of Delivery: Pick up and drive away.