how much boost?

[NIPPY]

hey boys and girls,i have a n14 pulsar with sr20det in it. i just put a new bleed nipple in it and have boosted to 10psi. i have a front mount so is it going to be alright if i run 12psi ?

[1JZNOSHIT]

presumably you have exhaust and pod too? 12psi is fine.

[[PIG GTS]]

maybe even 15psi ???

[B0BB0]

pull the actuator line off

[Milhouse]

whats a bleed nipple ?

[Twe12ve]

have u seen 40 year old virgin? ahah u defn get to see bleed nipples in that.

[jb01]

if its any help my gtir run's 1bar and is fine, standard injectors and ECU (but pod, exhaust, the usual stuff), but from what i have heard thats about the limit.

[NIPPY]

yeahr i have pod 3 inch exhaust front mount and lumpy rom chip 'apparentely" . running 12psi now goes much better . anybody no what larger turbo i can get that im gonna get more horse thats gonna bolt up 2 my manifold and no modifying needed?

[[PIG GTS]]

hks gtrs would be a good upgrade ;)

[ZERO]

std maf and injectors can take 200fwkw then their limited
im guessing its a t23 or a t25, not forgetting there a ceramic wheel so you cannot safely run over 14 psi which will get you fairly close to the max power limit for the fuel system anywho

a good upgrade and cheep upgrade without much hastle is a t28 off the newer sr's but anything much bigger you gotta upgrade a heap of other ****

in your lil light car 180-200hp@treads is friggn quick

[hayai]

assuming it's a GTiR engine it will be running a T28 plain bearing turbo with a larger exhaust housing then those found on the S14 and S15's. I am also fairly certain that they are steel wheeled since the T28's and T25g's are steel wheeled.

Your biggest problem will be detonation/intake heat.

[ZERO]

i stand corrected :D